Urgent G2 gearbox shaft leak help for Newby

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
BigJock
Posts: 14
Joined: Thu Aug 10, 2017 2:16 pm
Location: Jockland

Urgent G2 gearbox shaft leak help for Newby

Post by BigJock »

Hi all from new (but very old...) member.
Just did a deal to px my 1960 G2 for a larger G5 and it's due to go away tomorrow.
Sods law it's sprung a leak - a good one too - on stripping off right hand cover the lead seams to be twofold.
1) from around the gear selector shaft 2) from inside the shaft itself which appears to be hollow.
I can understand the o ring on outer shaft leaking but from inside the shaft????
Can anyone shed light on this asap please????
To change the o ring do you simply unbolt the outer gearbox cover??
What about the leak from the inner shaft??
Also by sitting over the winter I've now got no clutch - anyone help??
Regards
Jock
ps I've been lucky for the last few years with it and sods law the day before it goes this happens....
User avatar
clanger9
Posts: 1165
Joined: Sat Jun 20, 2015 9:38 am
Location: Chester, UK

Re: Urgent G2 gearbox shaft leak help for Newby

Post by clanger9 »

Hi Jock,

There are 2 o-rings on the gear indicator shaft (which is inside the selector shaft).
There's also an o-ring in the outer case that seals the selector shaft. Some pics here:
https://www.ifixit.com/Guide/AJS-Matchl ... 77#s172050

Hopefully an easy fix!
1989 Moto Morini Dart 350
1993 Ducati 750SS
SPRIDDLER
Member
Posts: 8542
Joined: Wed Sep 01, 2004 1:00 am
Location: WEST SUSSEX UK

Re: Urgent G2 gearbox shaft leak help for Newby

Post by SPRIDDLER »

BigJock wrote:Also by sitting over the winter I've now got no clutch - anyone help??
What exactly does 'no clutch' mean?
Does it not free?
Does it slip?
Does the handlebar lever not move?
If it's been unused over winter the plates could be stuck together and need to be freed.

Gissaclew...........
'There is a tide in the affairs of men
Which taken at the flood............'
User avatar
Ozmadman
Posts: 2651
Joined: Wed Dec 14, 2011 1:02 am
Location: ESSEX UK

Re: Urgent G2 gearbox shaft leak help for Newby

Post by Ozmadman »

clanger9 wrote:Hi Jock,

There are 2 o-rings on the gear indicator shaft (which is inside the selector shaft).
There's also an o-ring in the outer case that seals the selector shaft. Some pics here:
Hopefully an easy fix!
There is a mod for the outer o ring which is now a shaped seal instead, not sure of the part number off hand but it is the same number as the o ring but with and X suffix. Mine still leaks a bit from there despite o ring and seal changes!
Paul
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
shifter
Posts: 479
Joined: Mon Jun 16, 2014 8:30 pm
Location: NORTH

Re: Urgent G2 gearbox shaft leak help for Newby

Post by shifter »

I bought the new type 0 ring seals gear & kick shaft from the club site fitted them to my daughters G2csr and the oil is staying in the box now no weeping at all
shifter
?
User avatar
clanger9
Posts: 1165
Joined: Sat Jun 20, 2015 9:38 am
Location: Chester, UK

Re: Urgent G2 gearbox shaft leak help for Newby

Post by clanger9 »

Mine is nice & oil tight now around the gear change, but I can't figure out how the kickstart seal is supposed to work.
It seems to be designed to leak (unless there is a way to remove all end float from the kickstart shaft...). Perhaps I'm missing a shim somewhere?
1989 Moto Morini Dart 350
1993 Ducati 750SS
BigJock
Posts: 14
Joined: Thu Aug 10, 2017 2:16 pm
Location: Jockland

Re: Urgent G2 gearbox shaft leak help for Newby

Post by BigJock »

Many thanks folks. Stripped down last night so finally know what I am talking about....maybe! 1 o ring missing from selector shaft - what a Â¥£â‚¬â‚© design - too used to working on oil free Japs. So now the leak is identified how the blazes do you get the end cover and that damn selector spring and pawl back in ?????
BigJock
Posts: 14
Joined: Thu Aug 10, 2017 2:16 pm
Location: Jockland

Re: Urgent G2 gearbox shaft leak help for Newby

Post by BigJock »

BTW lost the clutch because oil level had dropped and the pull lever inside rh cover had locked up.
User avatar
clanger9
Posts: 1165
Joined: Sat Jun 20, 2015 9:38 am
Location: Chester, UK

Re: Urgent G2 gearbox shaft leak help for Newby

Post by clanger9 »

"With care" ;)
If you line everything up as per the photo, the cover should go on...
1989 Moto Morini Dart 350
1993 Ducati 750SS
BigJock
Posts: 14
Joined: Thu Aug 10, 2017 2:16 pm
Location: Jockland

Re: Urgent G2 gearbox shaft leak help for Newby

Post by BigJock »

Its not playing ball
The spring just barely locates and as soon as you move the assy the pawl pivots ansd spring falls out
Locked