One of my jampots is leaking...
-
- Posts: 8
- Joined: Wed Aug 20, 2014 7:27 pm
- Location: Hertfordshire
Re: One of my jampots is leaking...
Many thanks Spriddler - excellent articles indeed and very helpful for me.
John
John
- Pharisee
- Member
- Posts: 1131
- Joined: Tue Mar 15, 2016 8:51 pm
- Location: Lincolnshire UK
- Contact:
Re: One of my jampots is leaking...
I have to say that the thought of using a pipe wrench on the soft aluminium body of the jampot fills me with horror. For the sake of a few minutes work, I made this clamp from a piece of 2.1/2" x 1.1/4" hardwood (American ash, if you're interested). I used a 50mm 'Forstner Bit' to make the hole and lined it with a strip of 2mm thick nitrile rubber. One side was cut out and clamped with two pieces of 8mm threaded rod. With the 8mm nuts done up tightly, that held the body securely enough to allow me to fully tighten the bottom clevis.
I'm from the Fens.... Gimme six.
-
- Member
- Posts: 3369
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: N YORKS UK
Re: One of my jampots is leaking...
Great pics and they're so shiny.
As I also have two Record heavy steel sash clamps I might do this over winter.
Did fix them 35 years ago or so, probably no oil in them at all as I don't see any leaks. It was a hell of a job involving a large woodwork vice and heavy duty rope.
Oh dear oh dear.
Johnny B
As I also have two Record heavy steel sash clamps I might do this over winter.
Did fix them 35 years ago or so, probably no oil in them at all as I don't see any leaks. It was a hell of a job involving a large woodwork vice and heavy duty rope.
Oh dear oh dear.
Johnny B
-
- Posts: 8
- Joined: Wed Aug 20, 2014 7:27 pm
- Location: Hertfordshire
Re: One of my jampots is leaking...
Pharisee - thanks v much for the pic of your wooden clamp. I think my first step is to knock up something similar for removing and subsequently tightening the bottom clevis.
I must say that having read all the helpful advice and articles, I have a certain amount of trepidation at the thought of dismantling the whole unit. There again, that's all part of the fun!
May I say many many thanks to everyone who has responded. This is the first time I have posted on the forum and I'm really grateful to you all for taking the time and trouble to share your experience and knowledge. I'm now much better equipped to launch into this jampot adventure!
Cheers all
John
I must say that having read all the helpful advice and articles, I have a certain amount of trepidation at the thought of dismantling the whole unit. There again, that's all part of the fun!
May I say many many thanks to everyone who has responded. This is the first time I have posted on the forum and I'm really grateful to you all for taking the time and trouble to share your experience and knowledge. I'm now much better equipped to launch into this jampot adventure!
Cheers all
John
- dave16mct
- Member
- Posts: 3255
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: One of my jampots is leaking...
Just one more thing, warm up the clevis before you unscrew it.
Dave
Dave
-
- Posts: 8
- Joined: Wed Aug 20, 2014 7:27 pm
- Location: Hertfordshire
Re: One of my jampots is leaking...
Thanks v much Dave - I'll have the blow torch to hand.
John
John
- robcurrie
- Member
- Posts: 956
- Joined: Fri Dec 09, 2011 5:33 pm
- Location: Limpopo SOUTH AFRICA
- Contact:
Re: One of my jampots is leaking...
For those who don t have sash clamps, you could use ratchet straps instead.56G80S wrote: As I also have two Record heavy steel sash clamps I might do this over winter.
Johnny B
Rob C
- GOLDSTAR
- Member
- Posts: 2521
- Joined: Thu Sep 11, 2003 1:00 am
- Location: KENT UK
Re: One of my jampots is leaking...
if you wish to fit and forget Ikon and a Brit company, the name of which escapes me but Steve Surbey can tell you, make rebuildable inserts you can fit inside the jampot housing, I think they are around £150 not cheap but done for good, kind regards
- Pharisee
- Member
- Posts: 1131
- Joined: Tue Mar 15, 2016 8:51 pm
- Location: Lincolnshire UK
- Contact:
Re: One of my jampots is leaking...
I inherited them from my Dad; he was a carpenter. Always wondered what I was going to do with them56G80S wrote: As I also have two Record heavy steel sash clamps I might do this over winter.
I'm from the Fens.... Gimme six.
-
- Posts: 8
- Joined: Wed Aug 20, 2014 7:27 pm
- Location: Hertfordshire
Re: One of my jampots is leaking...
Thanks Rob