Down pipe
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Down pipe
They have different part numbers, so it should be assumed they are not interchangeable.
- Ozmadman
- Posts: 2651
- Joined: Wed Dec 14, 2011 1:02 am
- Location: ESSEX UK
Re: Down pipe
Same bore but if you try to fit a G2 front pipe on a G5 it will be far to high along the bottom run of the pipe and foul or even go above the front foot restshifter wrote:Hello anyone know if a model 14/g2 csr exhaust downpipe would fit a g5/model 8, or with the pot being higher on the latter hinder it I am assuming they will be the same bore ?
Paul
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH
Re: Down pipe
Thank you Ozmzdman that's what I was thinking its just that I prefer the swept back pipe that's on the G2 csr look so it looking like buying a length of stainless tube of the right bore and getting the pipe benders dusted off.
shifter
shifter
?