I am currently doing up the engine of a 1953 M30.
The crankcase halfs are a bit rough and I have my doubts about getting it oil tight.
Specially where the cilinders meet the crankcase throats.
The drive side crankcase throat is bevelled to create a oil gallery for feeding the inlet camshaft.
This leaves some very narrow sealing surfaces, specially near the (far too large) pushrod holes.
Then there is the oil feed to the crankcase bridge, for the heads.
The annular groove of the drive side cilinder has to take care of that.
I have my doubts about how much oil leaks away here.
Later models (from 1956 onwards?) make use of the hole drilled for the front top crankcase bolt for feeding the crankcase bridge gallery, which, if I understand correctly, is fitted with 2 metering plugs 018990 for feeding both camshaft areas.
Would it be worthwile to convert / machining the 1953 cases to this later way of oil distribution?
So blocking of both galleries created by the cilinder.
Another thing that puzzled me:
The timing side crankcase half is so to say the blind side of the crankcase bridge gallery. Here, same as on the drive side, in the middle, a hole is drilled that meets the annular groove of the timing side cilinder. The is no other connection to this groove, so oil can go nowhere. Unless by leakage..
What can be the purpose of this?
Below some images of the actual delinquent..
- New Users
- Board index Help G9 / AJS Model 20
-
- It is currently Wed May 08, 2024 5:14 am
- All times are UTC+01:00
1953 M20: modification oilsystem to later version worthwile?
Information relating to the Matchless G9 or AJS Model 20 500cc twin
-
- Member
- Posts: 10
- Joined: Fri Dec 23, 2016 5:26 pm
- Location: NETHERLANDS
Jump to
- Public Forums
- ↳ General Topics
- ↳ Modern AJS
- ↳ Help
- ↳ Frequent Questions
- ↳ Recommendations
- ↳ Where are they now?
- ↳ News Items
- Help
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18
- ↳ G80 Harris
- ↳ G9 / AJS Model 20
- ↳ G11 / AJS Model 30
- ↳ G12 / AJS Model 31
- ↳ G15 / AJS Model 33
- ↳ Competition / Racers
- ↳ Prewar
- ↳ Two Strokes
- ↳ Pre-War
- ↳ Post-War Classic
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18 / Harris
- ↳ G9 / Model 20
- ↳ G11 / Model 30
- ↳ G12 / Model 31
- ↳ G15 / Model 33
- ↳ Modern AJS
- Sections
- ↳ Bristol
- ↳ Cheshire and North Wales
- ↳ Chiltern
- ↳ East Berkshire
- ↳ East London and Essex
- ↳ East Midlands
- ↳ East Suffolk
- ↳ East Yorkshire
- ↳ Fenrunners
- ↳ Hampshire
- ↳ Heart of England
- ↳ Kent
- ↳ North East
- ↳ Notts and Derby
- ↳ Oxford
- ↳ Poachers
- ↳ Surrey
- ↳ Sussex
- ↳ Wey Valley
- ↳ Worcester
- ↳ France