G80 Dynamo sprocket
-
- Posts: 14
- Joined: Fri Jan 08, 2016 5:05 pm
- Location: UK
G80 Dynamo sprocket
Hi,
Can anyone tell me how many teeth should be on the dynamo sprocket
I am off to the Carole Nash bike show tomorrow & hope to find one.
Thanks
Phil.
Can anyone tell me how many teeth should be on the dynamo sprocket
I am off to the Carole Nash bike show tomorrow & hope to find one.
Thanks
Phil.
- GOLDSTAR
- Member
- Posts: 2521
- Joined: Thu Sep 11, 2003 1:00 am
- Location: KENT UK
Re: G80 Dynamo sprocket
whats it for, arn't the single's different to the twins? kind regards
- Stuoyb
- Posts: 1229
- Joined: Tue Jul 27, 2004 1:00 am
- Location: BEDFORDSHIRE UK
Re: G80 Dynamo sprocket
17 teeth.
It needs to be able to take rhe lock washer see the picture on the parts website part no. 000725
It needs to be able to take rhe lock washer see the picture on the parts website part no. 000725
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: G80 Dynamo sprocket
17 teeth and the same sprocket used on a single manual mag since at least mid 1930's. But you do not use the key special nut clip and washer on the mag. As Stu says, you must use those fittings on the dynamo. Prior to about 1951 new pt. no. 000725 was
STD 725. Should be plenty about, Used on all singles for about 20 years. On both mag and dynamo.
STD 725. Should be plenty about, Used on all singles for about 20 years. On both mag and dynamo.
-
- Posts: 14
- Joined: Fri Jan 08, 2016 5:05 pm
- Location: UK
Re: G80 Dynamo sprocket
Thanks Guys,
Take the note on the lock washer.
Regards
Phil.
Take the note on the lock washer.
Regards
Phil.
- clive
- Member
- Posts: 5670
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: G80 Dynamo sprocket
Really surprised to read the same sprocket used on the mag and dynamo. Not so on my bikes. The dynamo has the two slots for the special washer, and the mag does not. Tried to look it up on the Archives but its not working. Anyone else having that problem?
clive
if it ain't broke don't fix
if it ain't broke don't fix
- dave16mct
- Member
- Posts: 3243
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: G80 Dynamo sprocket
The dynamo sprocket is deeper, has 2 or 4 (?) slots for the special locking washer and 2 flats for a spanner. I can't remember if it's 2 slots or 4. (Its 4 slots , just looked it up in the archives. So they're working for me Clive)
Dave.
Dave.
- clive
- Member
- Posts: 5670
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: G80 Dynamo sprocket
You are right it's 4 slots and the key way for a woodruff key, not fitted on the mag sprocket.
clive
if it ain't broke don't fix
if it ain't broke don't fix
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: G80 Dynamo sprocket
Looks like I had my prewar AJS head on. I Checked, the post war AJS did have a different sprocket STD 726. As I have only prewar AJS, I guess that's why all the I have are the same.
- GOLDSTAR
- Member
- Posts: 2521
- Joined: Thu Sep 11, 2003 1:00 am
- Location: KENT UK
Re: G80 Dynamo sprocket
just to be different, the two I have, only have two slots, so there! kind regards
don't matter much so long as you can use the locking washer!
don't matter much so long as you can use the locking washer!