The info given above relates to the use of a Twin piston in a Lightweight 350 and is incorrect. It is actually a 1959 only 650 Twin piston that fits into the Lightweight 350. If you fit a 600 piston the compression is very low due to the gudgeon pin being nearer the crown.
NOTE THIS PLEASE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
FOR FUTURE INFOMATION ?????????????????????????????????????????
350 lightweight piston
- rex.webb
- Member
- Posts: 2947
- Joined: Mon Jan 01, 1990 12:00 am
- Location: CAMBRIDGESHIRE UK
Re: 350 lightweight piston
r w webb
-
- Member
- Posts: 243
- Joined: Sat Jan 01, 1994 12:00 am
- Location: Newzealand NEW ZEALAND
Re: 350 lightweight piston
Thank you all who replied. I did try a 600 piston , disregarding it due to the gudgeon height. I do not have a '59 piston to try, but it does open up an opportunity. I also understand Triumph 650 pistons can be used in a longstroke 350, but this has been overbored so again, discarded. Excuse the ignorance, but who is John Harding ?
Marty
Marty
-
- Member
- Posts: 352
- Joined: Tue Jul 28, 2009 5:51 pm
- Location: BERKSHIRE UK
Re: 350 lightweight piston
John Harding advertises in Old Bike Mart, "Pistons..." He also supplies rings, UK phone number 01989 750731. Was very helpful a couple of years ago when I was looking for rings for my G9.
-
- Member
- Posts: 243
- Joined: Sat Jan 01, 1994 12:00 am
- Location: Newzealand NEW ZEALAND
Re: 350 lightweight piston
Just a note as to the outcome of my experiment, I have used a late 650 +40 piston which I will slightly reshape the crown to suit the 350 head and fit a 3/4" gudgeon bush. I did this because I had one and the gudgeon heights were similar
Marty
Marty