Can anyone tell me the thread size in the end of the G11 dynamo crankshaft
I want to tap out thread after the alternator adaptor sheared off
Does anyone have a alternator adaptor that I could purchase or copy
1958 G11 Crankshaft
-
- Member
- Posts: 1580
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
-
- Member
- Posts: 1580
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
Re: 1958 G11 Crankshaft
looks like it's a (9/16) inch _ 20 Tpi Cycle thread , RH thread
Can anyone confirm before i buy a new tap ?
Can anyone confirm before i buy a new tap ?
-
- Member
- Posts: 1580
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
Re: 1958 G11 Crankshaft
Next question , is it cycle thread or UNF both 20TPI 9/16 "
The gearbox main shaft on a CP box fits , but the rear wheel spindle off my 67 P11 does not (both 20TPI 9/16")
Difference I believe is the thread depth between thread forms
Have I anwered my own question , earlier thraed on CP box mostlikely to be cycle thread
Hopefully someone knows the answer
The gearbox main shaft on a CP box fits , but the rear wheel spindle off my 67 P11 does not (both 20TPI 9/16")
Difference I believe is the thread depth between thread forms
Have I anwered my own question , earlier thraed on CP box mostlikely to be cycle thread
Hopefully someone knows the answer