Airbox mounting
4 posts
• Page 1 of 1
Airbox mounting
My machine came to me in a fairly rough state and after struggling for years with carb problems, I have now decided to try and return things to the original setup.
The airbox in the box of bits that came with the bike was in several pieces and I have decided it's not repairable, so have now got a new airbox from the factory.
I gather that there must be a mounting bracket from the back of the box to the base of the battery carrier. but whilst I could mock something up to do the job, I would be grateful for some detail to do it properly.
Any information would be gratefully received!
The airbox in the box of bits that came with the bike was in several pieces and I have decided it's not repairable, so have now got a new airbox from the factory.
I gather that there must be a mounting bracket from the back of the box to the base of the battery carrier. but whilst I could mock something up to do the job, I would be grateful for some detail to do it properly.
Any information would be gratefully received!
Re: Airbox mounting
Thanks Dave--very helpful. That's a section of the archives I've never accessed before.
Is the lower airbox mounting a one-piece bracket?
Albert
Is the lower airbox mounting a one-piece bracket?
Albert
Re: Airbox mounting
I don't know what the bracket's like (mines an MT350 not a Matchless) but I know the airbox is fragile so I'd be rubber mounting it to your new bracket.
Cheers Dave.
PS a friend of mine gave up and fitted an Amal concentric!
Cheers Dave.
PS a friend of mine gave up and fitted an Amal concentric!
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests