My Harris G80 blew either/both the battery and the regulator a while ago. I dont know which went first only that the battery went flat and then it blew the bulbs. I replaced the Battery , then found the regulator was faulty as well. The regulator was obsolete and I could only find a regulator off a CCM that fitted.
My problem is that the charging light has never worked . When I checked the loom it has been messed about a lot and only partly agrees with the official diagram. Everything now works except the charge light.
I am prepared to wire in the charge light separately if someone can tell me where it connects to. I assume that one side of the light should connect to the battery live and the other side to the regulator earth side
?????
Thanks
Ian
Harris G80 wiring
-
- Posts: 336
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: OXON UK
-
- Posts: 58
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WOODBRIDGE UK
Re: Harris G80 wiring
Just discovered your post in December.
Did you get a reply?
Did you get a reply?
- Eamonn
- Webmaster
- Posts: 2250
- Joined: Sun Jan 01, 1995 12:00 am
- Location: OXFORDSHIRE UK
- Contact:
Re: Harris G80 wiring
Albert, since Ian is not a club member and he has passed his 90 day access allowance, he unfortunately will not be able to respond.
Corners like a Lego man