Harris G80 wiring

Information related to the Harris Matchless (also known as Devon Matchless)
Posts: 336
Joined: Wed Oct 12, 2005 9:45 pm
Location: OXON UK

Harris G80 wiring

Postby ianselva » Sat Dec 08, 2012 2:39 pm

My Harris G80 blew either/both the battery and the regulator a while ago. I dont know which went first only that the battery went flat and then it blew the bulbs. I replaced the Battery , then found the regulator was faulty as well. The regulator was obsolete and I could only find a regulator off a CCM that fitted.
My problem is that the charging light has never worked . When I checked the loom it has been messed about a lot and only partly agrees with the official diagram. Everything now works except the charge light.
I am prepared to wire in the charge light separately if someone can tell me where it connects to. I assume that one side of the light should connect to the battery live and the other side to the regulator earth side
?????

Thanks

Ian

Member
Posts: 55
Joined: Mon Jan 01, 1990 12:00 am
Location: WOODBRIDGE UK

Re: Harris G80 wiring

Postby ushbert » Sat Mar 02, 2013 4:28 pm

Just discovered your post in December.
Did you get a reply?

Committee
User avatar
Posts: 1572
Joined: Sun Jan 01, 1995 12:00 am
Location: OXFORDSHIRE UK

Re: Harris G80 wiring

Postby Eamonn » Sat Mar 02, 2013 11:57 pm

Albert, since Ian is not a club member and he has passed his 90 day access allowance, he unfortunately will not be able to respond.

Corners like a Lego man

Return to G80 Harris

Who is online

Users browsing this forum: No registered users and 1 guest