G80/85CS Barrels
-
- Member
- Posts: 439
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: MIDDLESEX UK
G80/85CS Barrels
I don't know if anyone else has spotted that there are numerous new barrels for the G80/85CS on e-bay at the moment from various traders. Someone is remanufacturing... does anyone know who?
I wonder if they can be persuaded to remanufacture other parts for AMC machines... possibly via the club spares scheme?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT
http://cgi.ebay.co.uk/AJS-18CS-MATCHLES ... 3512079601
I wonder if they can be persuaded to remanufacture other parts for AMC machines... possibly via the club spares scheme?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT
http://cgi.ebay.co.uk/AJS-18CS-MATCHLES ... 3512079601
-
- Posts: 49
- Joined: Fri Dec 03, 2004 12:00 am
- Location: BRISTOL UK
G80/85CS Barrels
Well they are not compition barrels, but a copy of the road going cylinder cast in alloy. Look at the top fin/second fin no brace is in place. Either way very nice i have a few here now if you want any.
Perfect for any special.
But the original items are still hard to come by for under £500.00.
jh
Perfect for any special.
But the original items are still hard to come by for under £500.00.
jh
-
- Member
- Posts: 1581
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
G80/85CS Barrels
The club and many other spares stockists already get some of their stock from this suppier. My guess is that it's made in China or India but quality looks pretty good . Like holland I've got several in stock.
Often we are limited on supply of rare spares as the club are reluctant to let other suppliers see the drawings . These have obviously been reverse engineered (copies from genuine )
Perhaps It's time we had a section on the forum or email address that we could request remanufacture by the club and when the demand is there the resource could be allocated to copy drawimgs and get quotations. not a difficult job if the club actually wants to supply good quality rare parts. AMC classic obviously do this , as do Russell motors , but are limited to how many parts they target especially while genuine parts are available in short supply.
This is evident by the increasing parts lists from AMC classic , Andrews etc.
I'm not sure how many parts JSL manufacture on an exclusive basis . my impression is that it's pretty small
Often we are limited on supply of rare spares as the club are reluctant to let other suppliers see the drawings . These have obviously been reverse engineered (copies from genuine )
Perhaps It's time we had a section on the forum or email address that we could request remanufacture by the club and when the demand is there the resource could be allocated to copy drawimgs and get quotations. not a difficult job if the club actually wants to supply good quality rare parts. AMC classic obviously do this , as do Russell motors , but are limited to how many parts they target especially while genuine parts are available in short supply.
This is evident by the increasing parts lists from AMC classic , Andrews etc.
I'm not sure how many parts JSL manufacture on an exclusive basis . my impression is that it's pretty small
-
- Posts: 2337
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: victoria AUSTRALIA
G80/85CS Barrels
Now, if somebody starts making the early type.
-
- Member
- Posts: 373
- Joined: Wed Feb 01, 2012 1:22 pm
- Location: Vestland NORWAY
G80/85CS Barrels
quote:
Well they are not compition barrels ...
Hi James,
When wading through the picture archive, I discovered an image of your 620cc. Did you cast and machine the crancases yourself?
Someone in the UK made new crankcases for the late shortstrokes at one time not too long ago? I've been told that JSL had them but they were quickly snapped up. Do you know anything about the individuals involved?
I have a set of genuine crankcases here, unfortunately they do not match. Do you have an idea how to procede - welding and subsequent machining or having another half reproduced and subsequently matched to the opposite genuine half?
Sorry for stealing your thread, John.
Knut Sonsteby
Well they are not compition barrels ...
Hi James,
When wading through the picture archive, I discovered an image of your 620cc. Did you cast and machine the crancases yourself?
Someone in the UK made new crankcases for the late shortstrokes at one time not too long ago? I've been told that JSL had them but they were quickly snapped up. Do you know anything about the individuals involved?
I have a set of genuine crankcases here, unfortunately they do not match. Do you have an idea how to procede - welding and subsequent machining or having another half reproduced and subsequently matched to the opposite genuine half?
Sorry for stealing your thread, John.
Knut Sonsteby
-
- Posts: 49
- Joined: Fri Dec 03, 2004 12:00 am
- Location: BRISTOL UK
G80/85CS Barrels
yes i did cast and machine my own case's. i made the norton oil pump type as well as my specials with the outward appearance of the plunger pump cases but fitted with a big timing side bearing and triumph oil pump. i have plenty of pictures i can post if required.
to match odd case's is not a problem i have done this plenty of times before.
to match odd case's is not a problem i have done this plenty of times before.
-
- Member
- Posts: 373
- Joined: Wed Feb 01, 2012 1:22 pm
- Location: Vestland NORWAY
G80/85CS Barrels
That's exciting, James. I'd like to see these cases in detail, so please post pictures.
Would you have a go at mine, or is there someone you can recommend for this work? I have spoken to several engineers in the UK but they were reluctant to take on the job. How do you go about?
Knut Sonsteby
Would you have a go at mine, or is there someone you can recommend for this work? I have spoken to several engineers in the UK but they were reluctant to take on the job. How do you go about?
Knut Sonsteby
-
- Posts: 297
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HASLEV 4690 DENMARK
G80/85CS Barrels
Strange I thought it was Keith Rippin that cast the Norton Oil pump single cases,timing chests and barrels...and who also made the cams with KR stamped on them
-
- Posts: 49
- Joined: Fri Dec 03, 2004 12:00 am
- Location: BRISTOL UK
G80/85CS Barrels
Rippin did make stuff but not mine.
Infact i still have the pattern for the barrels which i bought from him some time ago as well as some drawing's also purchased from him.
We did do some business together but this was along time ago now.
My parts where cast in Surrey and machined in my workshop to my spec's, that way i kept a control on delivery and timescales as i was building a lot of comp machines at one time.
Anyway, he's all packed up now i hear. But i have seen him around.
jh
Edited by - holland on 09 Feb 2012 3:35:55 PM
Infact i still have the pattern for the barrels which i bought from him some time ago as well as some drawing's also purchased from him.
We did do some business together but this was along time ago now.
My parts where cast in Surrey and machined in my workshop to my spec's, that way i kept a control on delivery and timescales as i was building a lot of comp machines at one time.
Anyway, he's all packed up now i hear. But i have seen him around.
jh
Edited by - holland on 09 Feb 2012 3:35:55 PM
-
- Posts: 297
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HASLEV 4690 DENMARK
G80/85CS Barrels
Nope he is still going strong and making crankcases and machining them...But then HE does it all.....