g45 cylinder heads

Information relating to the Matchless G85 500cc Heavyweight, AJS 7R, Matchless G45 and Matchless G50
Locked
dannyp
Member
Posts: 1
Joined: Sat Oct 13, 2012 11:28 pm
Location: I O M UK

g45 cylinder heads

Post by dannyp »

can anyone supply me with a drawing showing machining details for some unfinished g45 heads, or at least inform me of the valve angles.
On the castings i have the rocker pillars are closer together than the standard g9.
Any other info on g45's would be very much appreciated.
Danny Pullen
hardhatsalty
Posts: 1
Joined: Wed Jul 13, 2016 9:05 am
Location: victoria australia

Re: g45 cylinder heads

Post by hardhatsalty »

Hi The valves are at 40 degrees that's 80 included and the rocker spindles are 4.874 inches apart. I'm happy to help you further if you wish. You can contact me 61 03 95845142 or gregmcmillan4@hotmail.com.
Greg
Locked