can anyone supply me with a drawing showing machining details for some unfinished g45 heads, or at least inform me of the valve angles.
On the castings i have the rocker pillars are closer together than the standard g9.
Any other info on g45's would be very much appreciated.
Danny Pullen
g45 cylinder heads
-
- Member
- Posts: 1
- Joined: Sat Oct 13, 2012 11:28 pm
- Location: I O M UK
-
- Posts: 1
- Joined: Wed Jul 13, 2016 9:05 am
- Location: victoria australia
Re: g45 cylinder heads
Hi The valves are at 40 degrees that's 80 included and the rocker spindles are 4.874 inches apart. I'm happy to help you further if you wish. You can contact me 61 03 95845142 or gregmcmillan4@hotmail.com.
Greg
Greg