Hi All,
I'm just getting ready to re-assemble my 1958 G80CS and despite cataloging all the parts I seem to have mislaid my instructions for how all the parts for the center stand go back together.
Does anyone have such instructions or could point me in the right direction ?
I think I have most parts identified , but I think there were spacers and the like and I'd like to get it right
Thanks !
Richard
G80 CS 1958 Centre Stand assembly
-
- Posts: 15
- Joined: Wed Sep 09, 2015 9:45 pm
- Location: Vermont
- dave16mct
- Member
- Posts: 3245
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: G80 CS 1958 Centre Stand assembly
Theres only one large spacer in the middle (you can tell its the right one because it'll have grooves from the spring), the spindle, the return spring, then there are 2 bushes which push into the stand eyes. Then 2 shouldered washers, and 2 nuts. There is a spring clip/stop which fits on the frame and stops the stand bouncing up and down. Its all on page 37 of the parts list.
Dave.
Dave.
-
- Posts: 15
- Joined: Wed Sep 09, 2015 9:45 pm
- Location: Vermont
Re: G80 CS 1958 Centre Stand assembly
Many thanks ! - that puts me in the right direction
Richard
Richard