G80 CS 1958 Centre Stand assembly

Information relating to the Matchless G85 500cc Heavyweight, AJS 7R, Matchless G45 and Matchless G50
Locked
Transatlantic
Posts: 15
Joined: Wed Sep 09, 2015 9:45 pm
Location: Vermont

G80 CS 1958 Centre Stand assembly

Post by Transatlantic »

Hi All,
I'm just getting ready to re-assemble my 1958 G80CS and despite cataloging all the parts I seem to have mislaid my instructions for how all the parts for the center stand go back together. :headbang:
Does anyone have such instructions or could point me in the right direction ?

I think I have most parts identified , but I think there were spacers and the like and I'd like to get it right
Thanks !
Richard
User avatar
dave16mct
Member
Posts: 3234
Joined: Mon Jan 01, 1990 12:00 am
Location: LANCASHIRE UK

Re: G80 CS 1958 Centre Stand assembly

Post by dave16mct »

Theres only one large spacer in the middle (you can tell its the right one because it'll have grooves from the spring), the spindle, the return spring, then there are 2 bushes which push into the stand eyes. Then 2 shouldered washers, and 2 nuts. There is a spring clip/stop which fits on the frame and stops the stand bouncing up and down. Its all on page 37 of the parts list.
Dave.
Transatlantic
Posts: 15
Joined: Wed Sep 09, 2015 9:45 pm
Location: Vermont

Re: G80 CS 1958 Centre Stand assembly

Post by Transatlantic »

Many thanks ! - that puts me in the right direction
Richard
Locked