hi , i have an atlas motor fitted to my model 33csr , coming round to refitting the chain case (after an engine rebuild ) the position of the alternator in relation to the rotor is puzzling me , it only sits halfway into the alternator ? i found this when i stripped the motor for a rebuild so it must have been working before i touched it ? or not ? anyone else had experience of this ? if i space the rotor out on the crankshaft there's only about 5 threads to hold the nut on , this dosent seem right , so my other thought was to make longer primary chain case studs and space the alternator inwards to suit the rotor position ? the photo is how i found it when i stripped the motor for the rebuild
all thoughts and comments on this gratefully received
andy
alternator /rotor position?
-
- Member
- Posts: 25
- Joined: Wed Sep 06, 2017 11:07 am
- Location: STH YORKS UK
alternator /rotor position?
You do not have the required permissions to view the files attached to this post.
- ajscomboman
- Member
- Posts: 3971
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: alternator /rotor position?
The spacer goes between the sprocket and the rotor.