Hi, as a newbie to the restoration game, I'm looking for the correct Tools for removing the Heads from a 1961 G12 CSR. My modern tool kit does not have a 'slim enough' socket to get to the bolts... any one got a source for such a tool ? Help would be much appreciated...[:(]
G12CSR Head Bolts
-
- Posts: 7
- Joined: Tue Sep 02, 2003 1:00 am
- Location: KENT UK
-
- Posts: 42
- Joined: Tue Dec 10, 2002 12:00 am
- Location: PETERBOROUGH UK
G12CSR Head Bolts
Tim,
you need a 1/4 whit 3/8 drive socket which is slim enough to do the job.
I had the same problem with my G9.
The company britool make one that is slim enough.If you cannot source one locally get in touch and I will get you one for you.
you need a 1/4 whit 3/8 drive socket which is slim enough to do the job.
I had the same problem with my G9.
The company britool make one that is slim enough.If you cannot source one locally get in touch and I will get you one for you.
-
- Posts: 7
- Joined: Tue Sep 02, 2003 1:00 am
- Location: KENT UK
G12CSR Head Bolts
John, Thanks
If I can't source one locally , I'll certainly be in touch.
If I can't source one locally , I'll certainly be in touch.
-
- Posts: 7
- Joined: Tue Sep 02, 2003 1:00 am
- Location: KENT UK
G12CSR Head Bolts
Hi all, mamaged to get what I needed at Kempton Park on Sat. Cheers John for the offer anyway.