Advice on brake items please

Information relating to the Matchless G12 or AJS Model 31 650cc twin
Member
Posts: 92
Joined: Wed May 08, 2019 6:41 pm
Location: UK

Advice on brake items please

Postby electrajohnt » Sat Feb 22, 2020 2:59 pm

Further guidance please - 1960 G12.
The brake levers on the end of the brake cam spindles: front and rear are the same hexagon fitting and similar “cranks” , I assume the slightly longer one goes on the front brake. This is the type that tucks itself behind the fork slider. Is my assumption correct?
Also, the front brake stay, before tightening the set screw into the brake back plate, the stay stands away from the back plate by approximately 1/2”. It will spring onto the backplate when the set screws is tightened, but is there supposed to be a spacer between the stay and backplate.

Help would be appreciated.
JohnT
JohnT

Member
Posts: 1914
Joined: Mon Mar 24, 2014 5:44 pm
Location: Aberdeenshire

Re: Advice on brake items please

Postby Mick D » Sat Feb 22, 2020 3:18 pm

Hi

The levers on my G3 are totally different in design - the front is formed to clear the fork, the rear follows a more direct line.

Have a look at the illustrations in the parts lists.

Regards Mick

Member
User avatar
Posts: 2124
Joined: Mon Jan 01, 1990 12:00 am
Location: LANCASHIRE UK

Re: Advice on brake items please

Postby dave16mct » Sat Feb 22, 2020 4:21 pm

There is no spacer on the front brake stay.
Dave.

Return to G12 / AJS Model 31

Who is online

Users browsing this forum: No registered users and 15 guests