I want to know the correct dimension of the spacer between the engine sprocket and the rotor part no. 025034 (G12 1961), hope someone on the forum can help me.
Regards Poul (Denmark)
Spacer rotor
-
- Member
- Posts: 328
- Joined: Mon Jan 01, 1990 12:00 am
- Location: DENMARK
-
- Posts: 136
- Joined: Wed May 08, 2019 7:41 pm
- Location: UK
Re: Spacer rotor
Hello ajsph
Below are dimensions taken using a digital vernier, I have written the dimension indicated, some rounding up or down may be possible.
The configuration of the spacer is a disc with hole in it with external chamfer ones side and internal chamfer opposite side. See the attached sectional view of the engine, magnify it and you will see what I mean.
Outside diameter. 37.97 mm
Inside diameter. 19.38 mm
Over all thickness. 6.33 mm
External chamfer diameter. 32.24 mm
External chamfer depth. 0.77 mm
Internal chamfer diameter. 27.83 mm.
Internal chamfer depth. 2.40 mm
Regards
JohnT
Below are dimensions taken using a digital vernier, I have written the dimension indicated, some rounding up or down may be possible.
The configuration of the spacer is a disc with hole in it with external chamfer ones side and internal chamfer opposite side. See the attached sectional view of the engine, magnify it and you will see what I mean.
Outside diameter. 37.97 mm
Inside diameter. 19.38 mm
Over all thickness. 6.33 mm
External chamfer diameter. 32.24 mm
External chamfer depth. 0.77 mm
Internal chamfer diameter. 27.83 mm.
Internal chamfer depth. 2.40 mm
Regards
JohnT
You do not have the required permissions to view the files attached to this post.
JohnT
-
- Member
- Posts: 328
- Joined: Mon Jan 01, 1990 12:00 am
- Location: DENMARK
Re: Spacer rotor
Hi John
Thanks for the help
Best regards
Poul (Denmark)
Thanks for the help
Best regards
Poul (Denmark)