Saddle

Information relating to the Matchless G12 or AJS Model 31 650cc twin
Member
Posts: 43
Joined: Fri Apr 16, 2004 12:00 am
Location: NORTH DEVON UK

Saddle

Postby Goss » Sun Mar 03, 2019 9:53 am

Can any one tell me were I can purchase a saddle for a 1961 G12 CSR please

Member
Posts: 1638
Joined: Mon Mar 24, 2014 5:44 pm
Location: Aberdeenshire

Re: Saddle

Postby Mick D » Sun Mar 03, 2019 10:18 am

Hi

R K Leighton would be my first choice:

http://www.rk-leighton.co.uk/

Regards Mick

Member
Posts: 43
Joined: Fri Apr 16, 2004 12:00 am
Location: NORTH DEVON UK

Re: Saddle

Postby Goss » Sun Mar 03, 2019 4:44 pm

Cheers Mick
Regards Tom

Member
User avatar
Posts: 94
Joined: Wed Oct 12, 2005 9:45 pm
Location: SHROPSHIRE UK

Re: Saddle

Postby owen » Sun Jun 09, 2019 9:25 pm

I don't know if this is any help, Two years ago at the Stafford Show, There was a dealer from I think the Sheffield area, They had a very good range of seat for most makes,, I looked at a seat that they did for my Matchless 1964 650 CSR, They looked quite well made to me.
So over to the experts who may remember who they where, I will also look through my drawers and other places and see if I can find there card. If you have resolved the problem let me know it may save me some hours looking.


Cheers Owen.

Posts: 40
Joined: Sun Aug 26, 2018 8:07 pm
Location: Germany

Re: Saddle

Postby Yves.Astein » Thu Jun 13, 2019 8:20 pm

In Case its just the Seat Cover. I bought a new one on Fleabay. It fitted verry well.

https://rover.ebay.com/rover/0/0/0?mpre ... 1455624186

The Seller is:
https://ebay.de/usr/dahdah-dit

Cheers Yves

Member
Posts: 193
Joined: Sat Jan 14, 2017 11:48 am
Location: WEST MIDLANDS UK

Re: Saddle

Postby bob121 » Fri Jun 14, 2019 12:44 pm

I had my seat from Leighton. Overall it's ok. If I was having one now, I would have an input regarding the foam. After five minutes of riding your on the seat pan. And after any kind of distance it becomes an issue. The only other thing is one of the rear holes doesn't quite line up with the hole in the frame. Which wouldn't matter apart from the fact that he convinced me to have a complete seat as the one off the bike wasn't very good, as it appeared to be a pattern one. That one fitted fine.

Return to G12 / AJS Model 31

Who is online

Users browsing this forum: No registered users and 3 guests