A/R cable on 650 CSR

Information relating to the Matchless G12 or AJS Model 31 650cc twin
Locked
JEAN-NOEL
Member
Posts: 601
Joined: Wed Oct 12, 2005 10:45 pm
Location: FRANCE

A/R cable on 650 CSR

Post by JEAN-NOEL »

Hi,
My A/R cable was too long to run properly from the A/R lever to the mag. I got one new, wich is perfect. But I noticed a problem : when the cable is released in position full advance, the "little piston" that actuates the cam goes down too far, and the cam become loose from full advance to full retard, and the lever some times remains solid. It is difficult to have a good setting, i.e. vith the cam pushed by the spring against the little screw wich limits the cam rotation. Fully released, the cable does not actuate the cam, slightly tight, there is a play between the "little piston" and the cam slot. Have I missed something ? Your advices welcome !
Cheers.
J.N.
Locked