!959 g12 clutch centre boss

Information relating to the Matchless G12 or AJS Model 31 650cc twin
Member
Posts: 40
Joined: Thu Jan 23, 2014 10:53 am
Location: WEST MIDLANDS UK

!959 g12 clutch centre boss

Postby vrossi46 » Tue Sep 26, 2017 9:31 am

Morning all. I am trying to remove the clutch centre boss from the output shaft of my G12. The primary chain, clutch plates and basket have been removed, and also the shock absorber cover plate. The workshop manual sugests that the boss should slide off the output shaft spline, but it will only move about 1/2" before it jams solid on the spine. Am I missing anything? Has anyone come across a similar problem?
Cheers.

Member
User avatar
Posts: 1784
Joined: Mon Jan 01, 1990 12:00 am
Location: LANCASHIRE UK

Re: !959 g12 clutch centre boss

Postby dave16mct » Tue Sep 26, 2017 9:49 am

The club sell a puller which will pull it straight off.

Dave.

Member
Posts: 40
Joined: Thu Jan 23, 2014 10:53 am
Location: WEST MIDLANDS UK

Re: !959 g12 clutch centre boss

Postby vrossi46 » Tue Sep 26, 2017 8:24 pm

Many thanks Dave. I've just viewed the tool on the shop site. Looks to be just the job.
Dave.

Return to G12 / AJS Model 31

Who is online

Users browsing this forum: Martin.S and 14 guests