It would be helpful if someone could state length of pushrods.
pre-60 G9
post-60 G9
pre-59 G11
1959 G12
post-60 G12
Thanks!
Knut
pushrods
-
- Member
- Posts: 373
- Joined: Wed Feb 01, 2012 1:22 pm
- Location: Vestland NORWAY
- dave16mct
- Member
- Posts: 3245
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: pushrods
Pre '60 G9 = 8 1/16", (same as G11 ) Pre '60 G12 = 8 3/8" Post '60 G12 = 8 5/8" I don't know post 60 G9.
Dave.
Dave.
-
- Member
- Posts: 373
- Joined: Wed Feb 01, 2012 1:22 pm
- Location: Vestland NORWAY
Re: pushrods
This is very useful data, Dave. Thanks a lot!
If anyone knows length of pushrods for post-'60 G9 engines, please submit.
-Knut
If anyone knows length of pushrods for post-'60 G9 engines, please submit.
-Knut
-
- Member
- Posts: 1
- Joined: Sat May 30, 2020 11:41 pm
- Location: Kent UK
Re: pushrods
Re push rod length.
I just ordered a push rod for my 1959 G12L. I picked the one that says 1959 only obviously.
When it arrived, it was 1/4" shorter than my other three.
I phoned Steve on spares desk and he said did you order by engine date. Yes I sad. Well you probably have 1960 heads on the engine.
Which need the longer rods.
I said it would be good if you put the length of your push rods on the listings as I would have naturally picked the right one.
Cheers Dave
P S oh poo it seems i have mentioned this back in December and forgotten that i did a orevious post. Oh well, thats what getting old does to you.....
I just ordered a push rod for my 1959 G12L. I picked the one that says 1959 only obviously.
When it arrived, it was 1/4" shorter than my other three.
I phoned Steve on spares desk and he said did you order by engine date. Yes I sad. Well you probably have 1960 heads on the engine.
Which need the longer rods.
I said it would be good if you put the length of your push rods on the listings as I would have naturally picked the right one.
Cheers Dave
P S oh poo it seems i have mentioned this back in December and forgotten that i did a orevious post. Oh well, thats what getting old does to you.....
Last edited by DaveHanna on Mon Feb 15, 2021 6:40 pm, edited 1 time in total.
- ajscomboman
- Member
- Posts: 3958
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: pushrods
Other than the post 1960 500's all length's have been loaded.