Noisy engine 61 31csr
-
- Member
- Posts: 560
- Joined: Sat Jan 01, 2000 12:00 am
- Location: EAST SUSSEX UK
Noisy engine 61 31csr
Hi all , I thought I would post this because it may help fellow members in the future . Completed resto of bike and she sounded quite rockery noise or top end noise ( I know amc twins aren't the quietest of motors ). I stripped top end found nothing then I noticed some marks on the inner valve springs where it had been making contact with the outer Spring. I purchased these valve springs on an Internet auction site original Terry's ones , on looking at the springs I cannot remove the inner from outer Spring, checked some old springs and found out there should be quite a clearance between the springs ,!put old valve springs in csr and now it sounds really nice !!! Don't always assume original parts are correct !
- saltbox alf
- Deceased
- Posts: 2205
- Joined: Mon Oct 03, 2011 12:25 pm
- Location: Aude, France
Re: Noisy engine 61 31csr
Well found and good advice, nobody knows everything and sellers often not much at all!!
Measure twice, cut once, seems to work for wood, so should help with metal stuff!
Measure twice, cut once, seems to work for wood, so should help with metal stuff!
Allons-y, amis de Matchless et AJS