Hi, I need help with setting up the cams to mesh with the crank,the manual says aliign dots but I have different dots on the cam wheel so not sure how to proceed. I brought a timing wheel from the club in case I needed it but cant find any info on how to use it to set cams. Its my first time working on a bike engine so any help much appriecated. Desperate to get out and enjoy this warm weather.
cheers
jeff
- New Users
- Board index Help G11 / AJS Model 30
-
- It is currently Fri Apr 26, 2024 3:20 pm
- All times are UTC+01:00
1957 600cc model 30 cam shaft timing help
Information relating to the Matchless G11 or AJS Model 30 600cc twin
-
- Posts: 1
- Joined: Mon Jun 04, 2018 7:11 pm
- Location: BERKSHIRE UK
Return to “G11 / AJS Model 30”
Jump to
- Public Forums
- ↳ General Topics
- ↳ Modern AJS
- ↳ Help
- ↳ Frequent Questions
- ↳ Recommendations
- ↳ Where are they now?
- ↳ News Items
- Help
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18
- ↳ G80 Harris
- ↳ G9 / AJS Model 20
- ↳ G11 / AJS Model 30
- ↳ G12 / AJS Model 31
- ↳ G15 / AJS Model 33
- ↳ Competition / Racers
- ↳ Prewar
- ↳ Two Strokes
- ↳ Pre-War
- ↳ Post-War Classic
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18 / Harris
- ↳ G9 / Model 20
- ↳ G11 / Model 30
- ↳ G12 / Model 31
- ↳ G15 / Model 33
- ↳ Modern AJS
- Sections
- ↳ Bristol
- ↳ Cheshire and North Wales
- ↳ Chiltern
- ↳ East Berkshire
- ↳ East London and Essex
- ↳ East Midlands
- ↳ East Suffolk
- ↳ East Yorkshire
- ↳ Fenrunners
- ↳ Hampshire
- ↳ Heart of England
- ↳ Kent
- ↳ North East
- ↳ Notts and Derby
- ↳ Oxford
- ↳ Poachers
- ↳ Surrey
- ↳ Sussex
- ↳ Wey Valley
- ↳ Worcester
- ↳ France