1958 600 twin
-
- Member
- Posts: 68
- Joined: Wed Mar 09, 2011 3:53 pm
- Location: WEST SUSSEX UK
1958 600 twin
Anyone have an idea what sort of lbs per square inch pressure I should be getting when I do a compression test on my 1958 600 twin when warm. Thanks Ray Woolford
-
- Posts: 36
- Joined: Mon May 14, 2007 10:26 pm
- Location: ISLE OF MAN UK
1958 600 twin
Don't know the pressure for a 600 twin; but it's as important that the pressures on each cylinder are within 5-10 psi of each other. Anything more than this and you may have a problem on the lower pressure cylinder.
Cheers,
Phil
Cheers,
Phil
- 1608
- Member
- Posts: 2495
- Joined: Mon Oct 05, 2009 1:00 am
- Location: ESSEX UK
1958 600 twin
On my standard compression G12 650 with warm engine and fully open throttle 130psi. Shouldn't think its much different on the 600.