piston rings
-
- Member
- Posts: 37
- Joined: Wed Jan 01, 1997 12:00 am
- Location: SOUTH YORKSHIRE UK
piston rings
i have a 600 hepolite +40 piston that needs new rings, im finding hard to find. the club dose GPM rings what are the difrences, can my pistons be modified to take these rings regards paul
- rex.webb
- Member
- Posts: 2947
- Joined: Mon Jan 01, 1990 12:00 am
- Location: CAMBRIDGESHIRE UK
piston rings
YES !!!!!!!!!!!!!!!!!
BUT you need a Decent chap on the Lathe turning the Groves out to suit .
Try "Thortons of Shrewsbery" for your rings .
BUT you need a Decent chap on the Lathe turning the Groves out to suit .
Try "Thortons of Shrewsbery" for your rings .
r w webb
-
- Posts: 38
- Joined: Wed Aug 26, 2009 4:28 pm
- Location: WILTS UK
piston rings
'Tis true what R W Webb states. To many folk out there think they know what they are doing ,but .... Choose your engineer carefully!
The correct ring diameter should be easy to find. Machinig the piston groove is where care must be taken
The correct ring diameter should be easy to find. Machinig the piston groove is where care must be taken
Crafty