Here's one a pal made up for me.
It's for the 'Reserve' side so has a short piece of brass tube brazed on to the tap first before adding the fine mesh filter.
Fuel tap filters
-
- Member
- Posts: 8560
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Fuel tap filters
You do not have the required permissions to view the files attached to this post.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Posts: 2886
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Fuel tap filters
Hi
Novel taps
If you want to mount screens to them I'd recommend counter boring them to accept the sleeve and solder in as per the video linked previously, (thanks Spitfire by the way for the supplier contact).
Modern reproduction taps are available to suit most machines and ethanol laced fuel but in this case I would probably choose to adapt your ones, ( a nice nod to the bike's history).
Regards Mick
Novel taps
If you want to mount screens to them I'd recommend counter boring them to accept the sleeve and solder in as per the video linked previously, (thanks Spitfire by the way for the supplier contact).
Modern reproduction taps are available to suit most machines and ethanol laced fuel but in this case I would probably choose to adapt your ones, ( a nice nod to the bike's history).
Regards Mick
- helloluketurner
- Posts: 56
- Joined: Mon Apr 11, 2016 10:24 am
- Location: Warwickshire UK
Re: Fuel tap filters
How strange!
They obviously fit & do their job as they've been on the motorbike for years.
I've unblocked the reserve (it seemed to be full of a gasket coloured paste) & I've hopefully sorted the leaky union out on the RH side with some PTFE tape.
I've also fitted an inline fuel filter to collect any crud.
They obviously fit & do their job as they've been on the motorbike for years.
I've unblocked the reserve (it seemed to be full of a gasket coloured paste) & I've hopefully sorted the leaky union out on the RH side with some PTFE tape.
I've also fitted an inline fuel filter to collect any crud.
-
- Member
- Posts: 3369
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: N YORKS UK
Re: Fuel tap filters
Neville
If you fit that in the Reserve side it'll be on the wrong side. You want that one on the offside as the Main. Then run out at top of pipe and switch to Reserve on nearside? Does this work with our "saddle" tanks though? All you'll have is the petrol unusable on the Main side because it can't get across to the Reserve side of the top frame tube?
What's really happening is making the tank capacity smaller for the benefit of an early warning. I reckon on only having about 25 miles or so if I have to switch to Reserve (nearside) tap; only had to do it very very rarely. You'd have to be pretty unlucky to be more than 25 miles from a fuel station.
Dad's Rover 110 had a solenid switched reserve which just start taking supply from lower down in the tank but our tanks aren't really one tank when things get low.
Johnny B
If you fit that in the Reserve side it'll be on the wrong side. You want that one on the offside as the Main. Then run out at top of pipe and switch to Reserve on nearside? Does this work with our "saddle" tanks though? All you'll have is the petrol unusable on the Main side because it can't get across to the Reserve side of the top frame tube?
What's really happening is making the tank capacity smaller for the benefit of an early warning. I reckon on only having about 25 miles or so if I have to switch to Reserve (nearside) tap; only had to do it very very rarely. You'd have to be pretty unlucky to be more than 25 miles from a fuel station.
Dad's Rover 110 had a solenid switched reserve which just start taking supply from lower down in the tank but our tanks aren't really one tank when things get low.
Johnny B
-
- Member
- Posts: 8560
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Fuel tap filters
You're right John; brain fade. I had intended to fit it on the right (main) side to give a bit extra fuel when switching to Reserve. (The mod was just one of those things a couple of old boys do to pass half an hour in the shed). It came with other NOS 'clearance' items that I'd obtained years ago, but in truth I never used it as when I came to fit it the threaded inlet end was too large in diameter for the tank 'ole. It remains submerged in petrol in a large ex Soupe de Poissons jar along with a couple of others and spare corks in order to prevent them drying out and crumbling. No doubt they'll still be there when I'm drying out and crumbling.56G80S wrote:If you fit that in the Reserve side it'll be on the wrong side. You want that one on the offside as the Main. Then run out at top of pipe and switch to Reserve on nearside?
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Member
- Posts: 452
- Joined: Tue May 27, 2003 1:00 am
- Location: SHROPSHIRE UK
Re: Fuel tap filters
That's how I did mine short bit of tube, around 1 1/4" inches long, filter one end, then solder to tap, fitted to R / H side, the L /H side filter direct to tap, same as Spriddlers.
Last edited by bitza on Fri Feb 09, 2018 6:09 pm, edited 1 time in total.
-
- Member
- Posts: 221
- Joined: Wed Nov 18, 2015 7:43 am
- Location: wiltshire
- Location: near swindon wilts
Re: Fuel tap filters
the nylon filter covers might fit your taps . you can also buy filter gauze to make your own filters for the taps , just need to do a bit of soldering afterwards .
best to have filter in the tank before the tap so it stops any larger deposits getting into the tap holes and blocking flow of fuel .
plenty of taps out there being sold if you need some more and also some people do refurbish old taps as well .
ewarts taps seem to have a few parts available to repair them and plenty of info on web about them .
shouldnt take too much to get them back to what you want if you have a bit of time and look around for ideas etc .
good luck
ian
best to have filter in the tank before the tap so it stops any larger deposits getting into the tap holes and blocking flow of fuel .
plenty of taps out there being sold if you need some more and also some people do refurbish old taps as well .
ewarts taps seem to have a few parts available to repair them and plenty of info on web about them .
shouldnt take too much to get them back to what you want if you have a bit of time and look around for ideas etc .
good luck
ian