Hi everyone,
Just had the primary outer case off my 1954 AJS 18s removed dynamo ordered a few bits from the club, seeing i had removed the dynamo chain i thought i might as well replace the split link as a matter of course.
When parts came i started put it back together.
The chain looks new and was fitted by PO, i just wondered should this chain have split link or should it be endless .
Kind regards,
Martin.
Dynamo chain
-
- Member
- Posts: 59
- Joined: Sun Nov 06, 2016 10:10 am
- Location: BEDFORSHIRE UK
- dave16mct
- Member
- Posts: 3242
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: Dynamo chain
Should be endless.
Dave.
Dave.
-
- Member
- Posts: 8549
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Dynamo chain
You'll find the Spares List useful:
http://archives.jampot.dk/book/Spares_l ... s_List.pdf
See last line, Page 19. Note 14. Endless.
http://archives.jampot.dk/book/Spares_l ... s_List.pdf
See last line, Page 19. Note 14. Endless.
You do not have the required permissions to view the files attached to this post.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
- clive
- Member
- Posts: 5663
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: Dynamo chain
Both the mag and Dynamo chains should be endless. With the Dynamo you risk clashing with the primary. If it is a new chain you could try to get rivet type link and changed yours to endless.
clive
if it ain't broke don't fix
if it ain't broke don't fix
-
- Member
- Posts: 59
- Joined: Sun Nov 06, 2016 10:10 am
- Location: BEDFORSHIRE UK
Re: Dynamo chain
Thanks for the replies and the part no,s and spares list guys,
I shall make it endless if i can get a link if not i will replace the whole chain ,i did have thoughts about this when i was putting it together sometimes you can fall into trap When you copy something that is wrong.
Thanks for your help,
Martin.
I shall make it endless if i can get a link if not i will replace the whole chain ,i did have thoughts about this when i was putting it together sometimes you can fall into trap When you copy something that is wrong.
Thanks for your help,
Martin.