Foldable kickstart lever for Burman GB

[clive]

image.jpeg

Note the kick start.

oh dear I had managed to delete that monstrosity (wonderful motorcycle) from my memory banks. It's back now.

[Allen_F]

Reproduction Norton Commando kick start might work. It wouldn't be hard to MacGyver splines from burman kick start onto AMC one if necessary.
https://www.ebay.com.au/sch/i.html?_fro ... r&_sacat=0

Fitted to my AMC box. I had to machine the gearbox side of the lever to facilitate correct meshing of the inner teeth .
Interestingly, the original kick start should have had the same procedure as it has slipped on the shaft and munched the inner splines.

[bitza]

Re :: my previous post regards folding kickstarts I cut my burman top side of bend and cut a BSA to suit, welded up dress and clean up,
Rechromed for a few quid ,jobs a good un.

[spookefoote1956]

Re :: my previous post regards folding kickstarts I cut my burman top side of bend and cut a BSA to suit, welded up dress and clean up,
Rechromed for a few quid ,jobs a good un.

I rest my case. Put the baby to bed.

[56G80S]

I don't recall the fixed lever being that much of a problem but only had the Burman box in for a couple of thousand miles. Putting it back in when I get the engine fixed over winter, so may find out!

Johnny B

[Pharisee]

I don't recall the fixed lever being that much of a problem but only had the Burman box in for a couple of thousand miles. Putting it back in when I get the engine fixed over winter, so may find out!

Johnny B

I found that if the rest position of the fixed kickstart was too 'upright', I sometimes found my right leg caught between the kickstart on my calf and the footrest on my shin when moving off from a standstill. Moving the kickstart back a couple of splines on the shaft sorted it out.