Hello all,
Firstly I am a new member from Essex UK so hello, I look forward to meeting you at club events.
I have a 1952 matchless g80s, the bike has been standing a few years and I'm in the process of getting it up and running again. At this point I have got her started and oil flowing. I am now progressing to getting it to idle and run well, are there any tips for setting the carb up?
My main question was is there somewhere to find out the part numbers of for instance the air control cable?
Your help would be appreciated
Charlie
Part numbers
-
- Posts: 7
- Joined: Thu Jun 04, 2020 6:52 pm
- Location: LANCASHIRE UK
- clive
- Member
- Posts: 5663
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: Part numbers
Yes the spares list! You need to spend a couple of hours looking at the fantastic resources on the archives. http://archives.jampot.dk/book/Spares_l ... ingles.pdf
Should get you to your spares list and
http://archives.jampot.dk to the general website. Look at the workshop manuals and owners manual (owners manual came with a new bike) and you will find lots to help you, apart from advice on this forum.
Welcome to the club by the way.
Should get you to your spares list and
http://archives.jampot.dk to the general website. Look at the workshop manuals and owners manual (owners manual came with a new bike) and you will find lots to help you, apart from advice on this forum.
Welcome to the club by the way.
clive
if it ain't broke don't fix
if it ain't broke don't fix
-
- Posts: 2886
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Part numbers
Hichaz_lithik wrote:are there any tips for setting the carb up?
Here's the guide to setting up an Amal Monobloc:
http://amalcarb.co.uk/downloadfiles/ama ... d_Tips.pdf
There's plenty of other good info on the Burlen, (Amal), website, well worth an explore.
If you haven't already done so I'd strip and clean the carb before trying to set it up.
Regards Mick
-
- Posts: 7
- Joined: Thu Jun 04, 2020 6:52 pm
- Location: LANCASHIRE UK
Re: Part numbers
Hi
That's great thank you very much both!
Have ordered the bits I need and the carb is apart currently cleaning it out. The float bowl looked more like a flower pot with soil in the bottom of it!
That's great thank you very much both!
Have ordered the bits I need and the carb is apart currently cleaning it out. The float bowl looked more like a flower pot with soil in the bottom of it!