Hi, hope some of you knowledgable people can heip as i am assembling (at long last) my 500cc shortstroke motor 1966
and would like to get things correct. The info on these engines is a bit sparse after trawling the archives.
Ignition ttming is 38 degrees fully advanced ?
Inlet and Exhaust valve timing and what tappet clearance to use when checking?
Tappet clearance to use for normal running and should it be set hot or cold?
Many thanks
Ian
Engine Specifications G80 Short Stroke
-
- Member
- Posts: 28
- Joined: Wed Nov 11, 2009 11:18 pm
- Location: LEICESTERSHIRE UK
- ajscomboman
- Member
- Posts: 3958
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Engine Specifications G80 Short Stroke
Yep 38 degree full advance or 10.98mm
Tappet clearance nil inlet and .005 exhaust set cold.
inlet opens 18 before TDC and closes 69 after BDC exhaust opens 50 before BDC and closes 30 after TDC .016 valve clearance when setting.
Cam mark 1 for exhaust and number 2 for inlet
Tappet clearance nil inlet and .005 exhaust set cold.
inlet opens 18 before TDC and closes 69 after BDC exhaust opens 50 before BDC and closes 30 after TDC .016 valve clearance when setting.
Cam mark 1 for exhaust and number 2 for inlet
- robcurrie
- Member
- Posts: 956
- Joined: Fri Dec 09, 2011 5:33 pm
- Location: Limpopo SOUTH AFRICA
- Contact:
Re: Engine Specifications G80 Short Stroke
Shouldn't that be TDC ?ajscomboman wrote: inlet opens 18 before BDC
Rob C
- ajscomboman
- Member
- Posts: 3958
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Engine Specifications G80 Short Stroke
robcurrie wrote:Shouldn't that be TDC ?ajscomboman wrote: inlet opens 18 before BDC
Rob C
I'm dyslexic yep you're right! I'll go back and edit it.