G80 Tappet Removal

Information relating to the Matchless G80 or AJS Model 18 500cc Heavyweight.
Locked
My_49_G80
Posts: 9
Joined: Tue Oct 18, 2016 1:30 pm
Location: SOUTH AUSTRALIA AUSTRALIA

G80 Tappet Removal

Post by My_49_G80 »

I have searches the archives and forum and can't find any information on the removal of the tappets to the G80 or G3L for that matter. Can someone tell me or send me link on how this is done? Are any special tools required? Cheers! :roll:
User avatar
Rob Harknett
Member
Posts: 11236
Joined: Mon Jan 01, 1990 12:00 am
Location: ESSEX UK

Re: G80 Tappet Removal

Post by Rob Harknett »

http://archives.jampot.dk/book/Workshop ... dition.pdf
Pages 45 /47. There's also a picture of the tool. Should cover the year of your bike what ever it is.??
My_49_G80
Posts: 9
Joined: Tue Oct 18, 2016 1:30 pm
Location: SOUTH AUSTRALIA AUSTRALIA

Re: G80 Tappet Removal

Post by My_49_G80 »

Thank you Rob. This is just the information I was looking for. Thank you. Somehow I knew it would be you who would reply. You are a mine of knowledge.
User avatar
Expat
Member
Posts: 1033
Joined: Thu Nov 12, 2015 2:22 pm
Location: Tennessee, USA

Re: G80 Tappet Removal

Post by Expat »

Rob, the clue may be in the poster's forum name. :)
Keep shiny side up.

These are my principles, if you don’t like them, I have others. (Groucho Marx)
User avatar
Rob Harknett
Member
Posts: 11236
Joined: Mon Jan 01, 1990 12:00 am
Location: ESSEX UK

Re: G80 Tappet Removal

Post by Rob Harknett »

My_49_G80 wrote:Thank you Rob. This is just the information I was looking for. Thank you. Somehow I knew it would be you who would reply. You are a mine of knowledge.
I know my way about so can find it. I don't know it all.
Locked