Rigid Frame Query...
-
matg80s
- Posts: 52
- Joined: Fri Jan 04, 2019 6:05 am
- Location: Sth.Aus.
Rigid Frame Query...
...
Last edited by matg80s on Sun Apr 07, 2019 10:41 am, edited 1 time in total.
-
rudelan_LAPSED
- Posts: 168
- Joined: Sat Nov 10, 2007 9:48 am
- Location: BELGIUM
Re: Rigid Frame Query...
This is a 1955 heavyweight frame. This type of frame is built only for 1955 models! Here's a picture ... You have the frame number at the saddle.With the number you will find the exact model
Life is beautiful and you have to enjoy it
-
matg80s
- Posts: 52
- Joined: Fri Jan 04, 2019 6:05 am
- Location: Sth.Aus.
Re: Rigid Frame Query...
...
Last edited by matg80s on Sun Apr 07, 2019 10:41 am, edited 1 time in total.
-
Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Rigid Frame Query...
You do not have the required permissions to view the files attached to this post.
-
Cjay59_LAPSED
- Posts: 520
- Joined: Mon Nov 05, 2012 3:43 pm
- Location: Cork, Ireland
- Contact:
Re: Rigid Frame Query...
Brochure 1955, may be in archives,
You do not have the required permissions to view the files attached to this post.
-
rudelan_LAPSED
- Posts: 168
- Joined: Sat Nov 10, 2007 9:48 am
- Location: BELGIUM
Re: Rigid Frame Query...
I search same catalogue (copy) but Matchless.
If everyone have...
If everyone have...
Life is beautiful and you have to enjoy it
-
Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Rigid Frame Query...
The bikes seen had rigid rear end, the topic frame is swinging arm. Frame number will ID if road or comp model.
-
Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Rigid Frame Query...
http://archives.jampot.dk/promotional/S ... French.pdfrudelan wrote:I search same catalogue (copy) but Matchless.
If everyone have...
French Matchless 55 version archives.
-
Cjay59_LAPSED
- Posts: 520
- Joined: Mon Nov 05, 2012 3:43 pm
- Location: Cork, Ireland
- Contact:
Re: Rigid Frame Query...
Thanks Rob, the thread had started discussing a rigid project, I missed the change!
Last edited by Cjay59_LAPSED on Wed Feb 06, 2019 1:13 am, edited 1 time in total.
-
Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Rigid Frame Query...
Still no frame number to ID what model the frame in question its for.
You do not have the required permissions to view the files attached to this post.