Cable routing?
- cfaber
- Posts: 346
- Joined: Mon Nov 20, 2017 5:37 am
- Location: USA, Colorado
- Contact:
Cable routing?
Does anyone have a picture of how the brake, clutch and choke cables are routed from the bars down to the various bits? Also how about the routing for the speedo cable?
Fix it until it's broken!
Otherwise how will
anything get done?
Otherwise how will
anything get done?
-
- Posts: 2884
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Cable routing?
Hi
The photos section of the site is full of examples where you can see the cable runs and be aware, the run can be influenced by cable length and type of handlebars. In general the throttle, clutch and choke cables are routed along the frame top tube, the speedo along the front down tube, under the gearbox then up to the speedo gearbox. The front brake is self explanatory. Find the smoothest curves you can using the access holes in the yokes.
Regards Mick
The photos section of the site is full of examples where you can see the cable runs and be aware, the run can be influenced by cable length and type of handlebars. In general the throttle, clutch and choke cables are routed along the frame top tube, the speedo along the front down tube, under the gearbox then up to the speedo gearbox. The front brake is self explanatory. Find the smoothest curves you can using the access holes in the yokes.
Regards Mick