AMAL settings list says for '51 G80S:
Type: 89B/1AK (remote float type)
Jet block: 54
Main jet: 180
Throttle slide: 29/4
Needle clip position: 3
Needle jet: Std
The jet block will be stamped with the number.
The suggested main jet may have to be smaller if an air filter is used - no mention of this in the list.
The throttle slide cutaway is 4, that is 4/16 = 1/4 inch.
Clip in centre groove.
Std needle jet is .106 inch (stamped 106)
Jet needle would be the standard type for an 89 carby. Wotchit coz sometimes the wrong one is fitted.
G80S jetting
-
- Posts: 19
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: NSW AUSTRALIA
- silverarrow
- Posts: 549
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LEICESTERSHIRE UK
G80S jetting
Also ensure you do not have any air leaks this fault gave me the same symtoms.
Les Smith
Les Smith
Keep smiling