I've heard of many SpridSparks that have outlasted the owners.JimFitz wrote:I've got one I could sell you - only used once Jim
mag not working - was fine!
-
- Member
- Posts: 8560
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: mag not working - was fine!
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
- Janet
- Member
- Posts: 4147
- Joined: Mon Jan 01, 1996 12:00 am
- Location: EAST YORKSHIRE UK
Re: mag not working - was fine!
Stephen, ignore the current silliness and remember to come back and update us on your progress.
-
- Posts: 2886
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: mag not working - was fine!
Hi Grolly
In the interest of furthering my education could you direct me to a wiring diagram which relates to your explanation please?
Thanks Mick
In the interest of furthering my education could you direct me to a wiring diagram which relates to your explanation please?
Thanks Mick
-
- Posts: 264
- Joined: Sun Apr 30, 2017 10:42 pm
- Location: ARGYLL UK
Re: mag not working - was fine!
Cleaned the top point tower and insulators, reassembled, gapped, turn over by hand, BIG BLUE SPARK, popped the plug in, gave her a wee tickle, manually adjusted the timing, up to compression, valve decompressor activated, swing and ......... potato, potato, potato, potato.....happy days - thanks folks.
-
- Posts: 202
- Joined: Thu Jan 01, 1998 12:00 am
- Location: North Cornwall
Re: mag not working - was fine!
Here is a link to a little book, "Magnetos Simply Explained".Mick D wrote:Hi Grolly
In the interest of furthering my education could you direct me to a wiring diagram which relates to your explanation please?
Thanks Mick
http://www.free-energy-info.co.uk/Magnetos.pdf
Hope it helps.
- Janet
- Member
- Posts: 4147
- Joined: Mon Jan 01, 1996 12:00 am
- Location: EAST YORKSHIRE UK
Re: mag not working - was fine!
Excellent news.Stephen G80 wrote:Cleaned the top point tower and insulators, reassembled, gapped, turn over by hand, BIG BLUE SPARK, popped the plug in, gave her a wee tickle, manually adjusted the timing, up to compression, valve decompressor activated, swing and ......... potato, potato, potato, potato.....happy days - thanks folks.
Now back to the silliness.
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: mag not working - was fine!
Most of the old STD parts were nuts.SPRIDDLER wrote:I think you have to convert the original STDxxx part number to the current format. P'raps Rob H will be able to confirm...........?ajstdrchris wrote:I've tried to find the SpridSpark device in the spares scheme but they're only available under the mental health act.