Crank Bearing spacers
So I knocked out the old drive side bearings which felt very rough. I know there should be one or two spacers between the two bearings, but I guess this depends on age as the earlier engine had bearings the same size whereas mine has different size bearings. The spacer I have is I'm sure wrong as the outer diameter is too big it would prevent oil getting to the outer bearing and also rub against the outer race when its turning. However the spares scheme stocks three spacers so the question is do I need one or two and which part numbers please ?
drive side bearings
-
Harry44
- Member
- Posts: 280
- Joined: Sat Dec 17, 2016 5:26 pm
- Location: SOMERSET UK
drive side bearings
You do not have the required permissions to view the files attached to this post.
si is does non opportunus vos postulo a maior pango