Ignition Timing
Re: Ignition Timing
Hi
This is not a turkey baster either - but it is a less intrusive method of 'anally' determining TDC
Regards Mick
This is not a turkey baster either - but it is a less intrusive method of 'anally' determining TDC

Regards Mick
You do not have the required permissions to view the files attached to this post.
- spookefoote1956
- Member
-
- Posts: 168
- Joined: Mon May 01, 2017 6:32 pm
- Location: Lancashire
Re: Ignition Timing
What is it Mick? (Genuine question)
Hail Joe Lucas ............ Prince of Darkness!
- Stephen G80
- Member
- Posts: 190
- Joined: Sun Apr 30, 2017 9:42 pm
- Location: ARGYLL UK
Re: Ignition Timing
its a fancy one of these (come with a 14mm adapter
) - http://www.ebay.co.uk/itm/BGS-Tools-Tdc ... 2237619935

Re: Ignition Timing
Stephen G80 wrote:its a fancy one of these (come with a 14mm adapter) - http://www.ebay.co.uk/itm/BGS-Tools-Tdc ... 2237619935
I bought a basic dial gauge similar to that one and am making the rest out of an old spark plug and some metal tube. It's a lot cheaper that way. I would have had it finished but there are so many other little jobs to be done. Cheers. Bruce.
- spookefoote1956
- Member
-
- Posts: 168
- Joined: Mon May 01, 2017 6:32 pm
- Location: Lancashire
Re: Ignition Timing
Thanks chaps. I see what you mean about the need to be cheaper!
Hail Joe Lucas ............ Prince of Darkness!
Re: Ignition Timing
Hi
Home made out of a length of aluminium rod - it helps when you have a lathe, taps, dies etc.
Regards Mick
Home made out of a length of aluminium rod - it helps when you have a lathe, taps, dies etc.

Regards Mick
Re: Ignition Timing
Mick D wrote:Home made out of a length of aluminium rod - it helps when you have a lathe, taps, dies etc.![]()
or a wire coat hanger and a pair of pliers............

You do not have the required permissions to view the files attached to this post.
What if the Hokey-Cokey is what it's all about?
Re: Ignition Timing
SPRIDDLER wrote:Mick D wrote:Home made out of a length of aluminium rod - it helps when you have a lathe, taps, dies etc.![]()
or a wire coat hanger and a pair of pliers............
Works for me!

Keep shiny side up.
Re: Ignition Timing
And me also 

Les
Rules are for the obedience of fools and the guidance of the wise
Rules are for the obedience of fools and the guidance of the wise
Who is online
Users browsing this forum: tmh and 7 guests