Hello,
I'm restoring a 1964 G3. The bike has Norton running gear (forks etc) as was standard on this machine. I'm struggling to find dimensions for the spacers on the rear spindle. I'm not sure if they are the standard Norton spacers or modified for the Matchless. A phone call - 01229 831331 - or email - dad@scotweb.com - would be very much appreciated.
regards
Dave Robinson
- New Users
- Board index Help G3 / Model 16
-
- It is currently Fri Apr 19, 2024 9:50 pm
- All times are UTC+01:00
1964 G3 spacers
Information relating to the Matchless G3 or AJS Model 16 350cc Heavyweight
-
- Member
- Posts: 2
- Joined: Thu Jan 01, 1998 12:00 am
- Location: Northumberland UK
Jump to
- Public Forums
- ↳ General Topics
- ↳ Modern AJS
- ↳ Help
- ↳ Frequent Questions
- ↳ Recommendations
- ↳ Where are they now?
- ↳ News Items
- Help
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18
- ↳ G80 Harris
- ↳ G9 / AJS Model 20
- ↳ G11 / AJS Model 30
- ↳ G12 / AJS Model 31
- ↳ G15 / AJS Model 33
- ↳ Competition / Racers
- ↳ Prewar
- ↳ Two Strokes
- ↳ Pre-War
- ↳ Post-War Classic
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18 / Harris
- ↳ G9 / Model 20
- ↳ G11 / Model 30
- ↳ G12 / Model 31
- ↳ G15 / Model 33
- ↳ Modern AJS
- Sections
- ↳ Bristol
- ↳ Cheshire and North Wales
- ↳ Chiltern
- ↳ East Berkshire
- ↳ East London and Essex
- ↳ East Midlands
- ↳ East Suffolk
- ↳ East Yorkshire
- ↳ Fenrunners
- ↳ Hampshire
- ↳ Heart of England
- ↳ Kent
- ↳ North East
- ↳ Notts and Derby
- ↳ Oxford
- ↳ Poachers
- ↳ Surrey
- ↳ Sussex
- ↳ Wey Valley
- ↳ Worcester
- ↳ France