Quote
"so instead of having raised splines to act as a stop on the mainshaft - which are always worn - for 043443 they fitted a thick washer in the centre which acted as a more positive stop and didn't wear to the same extent. I don't see any point in remanufacturing 040354 as the same problem will occur."
I can see the difference now, thank you. I managed to borrow a tool to hold the cush drive and with it on the shaft followed the instructions on the video.
Thank you all for the advice and I'm fairly certain I shall be back.........
Neil
- New Users
- Board index Help G3 / Model 16
-
- It is currently Fri Apr 19, 2024 10:54 am
- All times are UTC+01:00
Can't get into neutral.
Information relating to the Matchless G3 or AJS Model 16 350cc Heavyweight
-
- Posts: 85
- Joined: Fri Dec 28, 2018 12:09 pm
- Location: Cornwall
Jump to
- Public Forums
- ↳ General Topics
- ↳ Modern AJS
- ↳ Help
- ↳ Frequent Questions
- ↳ Recommendations
- ↳ Where are they now?
- ↳ News Items
- Help
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18
- ↳ G80 Harris
- ↳ G9 / AJS Model 20
- ↳ G11 / AJS Model 30
- ↳ G12 / AJS Model 31
- ↳ G15 / AJS Model 33
- ↳ Competition / Racers
- ↳ Prewar
- ↳ Two Strokes
- ↳ Pre-War
- ↳ Post-War Classic
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18 / Harris
- ↳ G9 / Model 20
- ↳ G11 / Model 30
- ↳ G12 / Model 31
- ↳ G15 / Model 33
- ↳ Modern AJS
- Sections
- ↳ Bristol
- ↳ Cheshire and North Wales
- ↳ Chiltern
- ↳ East Berkshire
- ↳ East London and Essex
- ↳ East Midlands
- ↳ East Suffolk
- ↳ East Yorkshire
- ↳ Fenrunners
- ↳ Hampshire
- ↳ Heart of England
- ↳ Kent
- ↳ North East
- ↳ Notts and Derby
- ↳ Oxford
- ↳ Poachers
- ↳ Surrey
- ↳ Sussex
- ↳ Wey Valley
- ↳ Worcester
- ↳ France