A friend goes back on his clutch on 350 GLS 1954.
At the time of putting back the plates plain steel, he notes that a plain steel plate is thicker than others. Is it normal and if so, where place it exactly? Thank you. Ruddy
G3LS 1954 - CLUTCH PLATE PLAIN
-
- Posts: 168
- Joined: Sat Nov 10, 2007 9:48 am
- Location: BELGIUM
G3LS 1954 - CLUTCH PLATE PLAIN
Life is beautiful and you have to enjoy it
- clive
- Member
- Posts: 5669
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: G3LS 1954 - CLUTCH PLATE PLAIN
Two possible answers. There were different thickness steel plates produced and this may just be one of those. Second answer early clutches had a special back plate which was very much thicker and was partially recessed. This went in first (with the recess facing towards the gearbox) so if there is one thick plate I would put it in first.
clive
if it ain't broke don't fix
if it ain't broke don't fix
-
- Posts: 168
- Joined: Sat Nov 10, 2007 9:48 am
- Location: BELGIUM