Hello,
The engine drain plug (timing side crankcase) is worn and I don't know which one to choose ... 000525 3/8 "or 000525A 1/4".
My Matchless is a 1955 G3LS.
I measured the width on the bolt thread: 13.1 mm.
I am also looking for the references of the drain plug and washer of the gearbox Burman B52.
Fiber washer or bonded washer?
Regards, Ruddy
Â
Plug, drain, for timing side crankcase size?
-
- Posts: 168
- Joined: Sat Nov 10, 2007 9:48 am
- Location: BELGIUM
Plug, drain, for timing side crankcase size?
Life is beautiful and you have to enjoy it
-
- Posts: 2886
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Plug, drain, for timing side crankcase size?
Hi
Sounds like 1/4" BSP - check the rest of the details here:
https://www.amesweb.info/Screws/BSP-Thread-Chart.aspx
Regards Mick
Sounds like 1/4" BSP - check the rest of the details here:
https://www.amesweb.info/Screws/BSP-Thread-Chart.aspx
Regards Mick
-
- Posts: 168
- Joined: Sat Nov 10, 2007 9:48 am
- Location: BELGIUM
Re: Plug, drain, for timing side crankcase size?
Hi,Mick D wrote:Hi
Sounds like 1/4" BSP - check the rest of the details here:
https://www.amesweb.info/Screws/BSP-Thread-Chart.aspx
Regards Mick
Great ! Thank you for this wonderful link...
Regards, Ruddy
Life is beautiful and you have to enjoy it