G3 AFS

Information relating to the Matchless G3 or AJS Model 16 350cc Heavyweight
G15 Roy
Member
Posts: 3546
Joined: Sun Jan 01, 1995 12:00 am
Location: ESSEX UK

Re: G3 AFS

Post by G15 Roy »

Rob Harknett wrote:
G15 Roy wrote:
Rob Harknett wrote:I would have thought it to be 26 tpi cycle thread. 023250 seems to be another part not used on earlier models.
But what about 000292 you sad you could provide the size
Listed by the club Roy but stocks limited. its 5/8" I see this is a half nut, so a bit special.
Ashampoo_Snap_2018.06.07_18h33m07s_001_.png
So they only stock them in Stainless
Roy
User avatar
Rob Harknett
Member
Posts: 11236
Joined: Mon Jan 01, 1990 12:00 am
Location: ESSEX UK

Re: G3 AFS

Post by Rob Harknett »

But limited Roy. Strange that stud and nut seems hard to locate.
daz3226
Posts: 18
Joined: Tue Mar 27, 2018 2:52 pm
Location: Essex

Re: G3 AFS

Post by daz3226 »

thanks for all the replies ,
have sourced the required nuts from AMC Classics.
it was the 000292 as listed ,5/8" Cycle thread 20TPI. its the same thread as spindle nut but only a half nut to allow seat fitment .
Locked