So they only stock them in StainlessRob Harknett wrote:Listed by the club Roy but stocks limited. its 5/8" I see this is a half nut, so a bit special.G15 Roy wrote:But what about 000292 you sad you could provide the sizeRob Harknett wrote:I would have thought it to be 26 tpi cycle thread. 023250 seems to be another part not used on earlier models.
G3 AFS
-
- Member
- Posts: 3547
- Joined: Sun Jan 01, 1995 12:00 am
- Location: ESSEX UK
Re: G3 AFS
Roy
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: G3 AFS
But limited Roy. Strange that stud and nut seems hard to locate.
-
- Posts: 18
- Joined: Tue Mar 27, 2018 2:52 pm
- Location: Essex
Re: G3 AFS
thanks for all the replies ,
have sourced the required nuts from AMC Classics.
it was the 000292 as listed ,5/8" Cycle thread 20TPI. its the same thread as spindle nut but only a half nut to allow seat fitment .
have sourced the required nuts from AMC Classics.
it was the 000292 as listed ,5/8" Cycle thread 20TPI. its the same thread as spindle nut but only a half nut to allow seat fitment .