Can anybody see whats wrong with my battery tray - the top mounting bolt hole does not align up with the frame
There are no other fittings are there that aid alignment?
Can anyone see what's amiss?
Cheers
Battery Tray
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Battery Tray
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 438
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: MIDDLESEX UK
Re: Battery Tray
It may be slightly twisted?
If I were you I would put the top mount in first and then the bottom two.
By the way the mounts on the bottom should be two countersunk screws into captive nuts in the frame... otherwise you can't fit the battery.
John
If I were you I would put the top mount in first and then the bottom two.
By the way the mounts on the bottom should be two countersunk screws into captive nuts in the frame... otherwise you can't fit the battery.
John
-
- Posts: 2886
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Battery Tray
Hi
Rather than force it to fit and introduce stress that will probably result in it cracking later put a washer or two on the rear bolt between the tray and frame if it won't straighten easily.
Regards Mick
Rather than force it to fit and introduce stress that will probably result in it cracking later put a washer or two on the rear bolt between the tray and frame if it won't straighten easily.
Regards Mick