I loosely assembled the brake pedal to be able to make up the little Brake Pedal/ Spring Stop(044342) that is specific to the G5
Using the following picture as a guide(This is a G2) I I think I might have a problem.
(picture courtesy of Eddison5)
With my picture below you can see that with the nut nipped up on the rear foot peg with the brake pedal and its spring fitted
it looks like the pedal isn't fitting in close enough towards the frame
The dimensions of the shaft are below - Have I something missing or the wrong parts?
Cheers
Brake Pedal and Shaft
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Brake Pedal and Shaft
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 1439
- Joined: Sat Oct 09, 2010 9:17 pm
- Location: ABERTAWE UK
Re: Brake Pedal and Shaft
The pedal boss does look a bit short, it should measure just under two inches, You may have a heavyweight lever, anyway I have added photos which may or may not help.
[url][/url]
Kind regards as akways
Colin
[url][/url]
Kind regards as akways
Colin
only dead fish go with the flow
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Re: Brake Pedal and Shaft
Thanks Colin - I've moved things around to replicate your picture and looks like things are correct - much appreciated - Thank you.
Martin
Martin
You do not have the required permissions to view the files attached to this post.