Wheel spindle length

Information relating to the Matchless G5 or AJS Model 8 350cc Lightweight
SPRIDDLER
Member
Posts: 8542
Joined: Wed Sep 01, 2004 1:00 am
Location: WEST SUSSEX UK

Re: Wheel spindle length

Post by SPRIDDLER »

Martin.S wrote:Thanks Spriddler - I can see the part No's for the G5 and G2 spindle but not the CS or CSR they all had different hubs and the G2, CS and G5 all had different yokes - what did the CSR have?
I've no first hand experience of L/Ws and documentation for the CSR is scarce. The only Parts List I can find that shows the CSR covers virtually everything except hubs :roll:
For future use if you haven't seen it it's here:
http://archives.jampot.dk/book/Spares_l ... o_1966.pdf

By the way - Why do you poke Badgers with a spoon?
Because I'm an animal lover and it's less painful for them than with a fork.
'There is a tide in the affairs of men
Which taken at the flood............'
Andy51
Member
Posts: 741
Joined: Thu Mar 31, 2005 1:00 am
Location: BERKS UK

Re: Wheel spindle length

Post by Andy51 »

Hi Martin, sorry, but I thought you had h/wt Teledraulics from you picture, so I measured my 50s front axle that goes with the 1 1/8 and 1 1/4 in forks and 7 inch brake. Ignore my dimensions. Andy
Locked