Control Cable Dimensions
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Control Cable Dimensions
Hi all. Is there listed the lengths of factory fitted control cables?
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Control Cable Dimensions
You will find some cable dimensions in the bikes parts lists.
http://archives.jampot.dk/technical/Car ... t_1957.pdf
There are dimensions of amal cables archived like the Sept 57 file, link above.
http://archives.jampot.dk/technical/Car ... t_1957.pdf
There are dimensions of amal cables archived like the Sept 57 file, link above.
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Re: Control Cable Dimensions
Mmmmm - couldn't find any lengths Rob.
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Control Cable Dimensions
ahhh did not put my lightweight hat on.
I only found 2. drawings attached.
I only found 2. drawings attached.
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 8542
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Control Cable Dimensions
Whether standard cables will fit does depend (to state the perhaps obvious) on whether you have original design h/bar levers.
I carried a spare clutch cable for a couple of years taped to the one in use for 000's of miles around Europe and when I came to fit it back home in the shed, it didn't.
I carried a spare clutch cable for a couple of years taped to the one in use for 000's of miles around Europe and when I came to fit it back home in the shed, it didn't.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Re: Control Cable Dimensions
Oh yes, took a while but BeenyBoy had a pair, now polished and re-chromed
You do not have the required permissions to view the files attached to this post.
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Re: Control Cable Dimensions
Thank you Rob for those two drawings