Hi,
This is my first post here at the Forum (Help). I own a G3LS from 1954 and an M16 from 1953. Both bikes to be restored. The G3LS was in a very weat place for 30 years and the M16 abandoned in farm at open air for 8 years. That means both are very rusty. But the worst part of the story is that I leave in the Azores islands, and they are about the last survivals of these bikes in this island, and no spare parts or mechanics that understands who those machines works. If I cannot put them back to work, I would like at least to make them showing in good shape. So any small or short help will be deeply appreciated.
Newbie help.
-
- Posts: 9
- Joined: Mon Aug 14, 2006 2:14 am
- Location: Portugal PORTUGAL
-
- Posts: 7721
- Joined: Tue Nov 22, 2005 6:01 pm
- Location: UK
Newbie help.
hello Azimute, what was meant wasthat you start a " New Topic"via the little button at the top. or your question will get lost in the inevitable flow of wit and wisdom that is this forum.
Best thing to do I suggest is to post a photo so we canhave a look at how bad[or not] your bike is
Best thing to do I suggest is to post a photo so we canhave a look at how bad[or not] your bike is